Portrait Painting

Face Ratio and Proportions for Drawing Portraits

Learn face ratios for portraits: vertical thirds, the eye line, five eye-widths across, feature placement, and how tilted heads change the rules.

On this page
  1. Vertical thirds and the eye line
  2. Where the nose and mouth sit
  3. Horizontal spacing with eye-widths
  4. Where the ears sit
  5. What the 50% rule means
  6. How to determine your face ratio
  7. Why strict ratios can look generic
  8. Adjusting for angles and tilted heads
  9. Digital tip: put guides on their own layer
  10. Keep building skills

Face ratios are starting guides, not rules. Most portrait drawing relies on two of them: the head divides into thirds from top to bottom, and it is roughly five eye-widths across. Once you know where the main landmarks sit, you can measure a reference, place features with confidence and spot what is off. This guide explains those ratios, shows how to check them on your own work, and covers why strict proportions can make a face look generic.

Vertical thirds and the eye line

Divide the head into three roughly equal sections, from the top of the skull to the chin:

  • Top of the head (or hairline) to the brow ridge
  • Brow ridge to the base of the nose
  • Base of the nose to the bottom of the chin

The eye line, where the eyes sit, is usually about halfway between the top of the skull and the chin. Hairstyles can make the top of the skull hard to judge, so treat the thirds as a check rather than a measurement you must hit exactly.

Where the nose and mouth sit

The base of the nose lands at the boundary between the middle and lower thirds. The mouth usually sits in the upper part of the lower third. A common check is to place the mouth line roughly one-third of the way down from the base of the nose to the chin.

Two other alignments are often useful. The outer edges of the nostrils often line up with the inner corners of the eyes. The corners of the mouth often line up with the centers of the pupils.

Horizontal spacing with eye-widths

Use one eye-width as your unit of measure. A head is roughly five eye-widths across when seen straight on. Leave about one eye-width between the eyes, and the outer corner of each eye sits about one eye-width in from the side of the head.

Because the unit is the eye itself, the grid scales to any size of drawing. Measure the eye first, then use that measurement for the other spaces.

Where the ears sit

The ears usually sit between the brow line and the base of the nose. Their top often lines up with the brow and their bottom with the base of the nose. Head tilt changes this a lot, so check the ears against the eyes and nose in the same drawing.

What the 50% rule means

The “50% rule” is a common name for the eye-line guide: place the eyes halfway down the head, from the top of the skull to the chin. It is a useful starting point for a front-facing portrait, but it is not a fixed law. The same name is used for a different idea in drawing practice, covered in what the 50% rule in art means. Hairstyles, head tilt and individual features all change how the eye line appears on the page.

How to determine your face ratio

You do not need a formula to check a face. A reference photo and a few simple steps are enough:

  1. Draw a light oval for the head and a vertical center line.
  2. Mark the eye line halfway between the top of the skull and the chin.
  3. Mark the brow ridge and the base of the nose to see whether the thirds look even.
  4. Measure one eye-width with a pencil, a ruler or a digital guide, then count how many widths fit across the head.
  5. Flip your drawing horizontally and compare it with the reference again.

Why strict ratios can look generic

Strict ratios tend to produce idealized, generic faces. Real people vary in eye size, eye spacing, jaw width and nose shape. Use the ratios to get the structure right, then check the drawing against a live model or reference and adjust. Stylized and anime portraits often change eye size, eye spacing or the jaw line on purpose.

Adjusting for angles and tilted heads

The thirds and eye-width rules get harder to apply when the head turns or tilts. When the head tilts up or down, the eye line moves on the page and the vertical spacing compresses. When the head turns, the eye-widths on the far side shrink. Artists disagree about how far the rules hold at extreme angles, so judge by eye as well as by measurement. For profiles, see the side profile guide.

Digital tip: put guides on their own layer

In a digital file, draw the guides on a separate layer in a light color, and hide them when the drawing is finished. Flip the canvas often (in Krita, see mirroring the view). Errors that look fine in the normal view often stand out when the image is mirrored.

Keep building skills

If you are still getting comfortable with basic head construction, start with how to draw portraits for beginners. Once your proportions hold up, move on to the digital art eyes tutorial, where eye placement matters a great deal.

The complete guide to portrait painting

How to Paint Skin and Portraits Digitally
Read the guide

Keep exploring

Guides from other topics

All topics →