Krita

Shading and Canvas Texture in Krita

Set up clipped shading layers in Krita, choose blend modes for shadows and highlights, and add canvas texture with brushes, overlays or patterns.

On this page
  1. Set up shading layers that stay inside shapes
  2. Choose the right blend mode
  3. Shade with three styles in mind
  4. Shift colors without repainting
  5. Add canvas texture
  6. Checklist

Good shading in Krita depends mostly on layer setup. If your shadows sit on their own layers, clipped to the flat colors, you can change them later without repainting. This guide covers that setup, the blend modes that matter most, and three ways to add canvas texture.

Set up shading layers that stay inside shapes

  1. Paint your flat colors, with one main shape per layer where possible.
  2. Group the base flat and the shading layer. Press Ctrl+G to group, or use the Quick Clipping Group command, which is Ctrl+Shift+G by default in many versions.
  3. Add a new paint layer above the flat, inside the group, and turn on Inherit Alpha. Your strokes now show only where the flat below has paint.

Clipping masks and alpha lock in Krita explains why this works and when Alpha Lock is the better choice.

A layer outside the group is not clipped. If strokes spill past a shape, check that the layer is inside the group and that Inherit Alpha is on.

When you pick shadow colors, the Color Picker’s Sample Merged option decides whether it reads the whole image or only the active layer. Turn it off to sample the current layer, which is useful when you shade inside a clipped layer.

Choose the right blend mode

  • Multiply darkens. It is a common choice for shadows, especially with a cool, tinted color rather than pure black.
  • Overlay, Soft Light and Color Dodge can add rich light and glow. They are strong, so lower the opacity until the effect feels right.
  • Screen lightens and suits soft highlights.
  • Normal gives direct control, because the color you paint is the color you see.
  • Hard Light works well with a neutral gray. In Hard Light, 50 percent gray has no visible effect, so you can fill a layer with gray and then paint on it. Darker strokes shade and lighter strokes highlight. David Revoy describes this method in his free overview of his Krita workflow.

Shade with three styles in mind

  • Soft shading uses a soft airbrush or blending tool at light pressure, with selections to mask areas. Blender brushes smooth the transitions. For more on this, see what blending is in art.
  • Cel shading uses hard-edged shadow and highlight shapes, painted with a hard brush or built with selection tools.
  • Textured shading uses a textured brush, such as a pencil or chalk preset, so the grain shows through the stroke.

Press E to toggle the eraser, which is a quick way to soften an edge you have just painted. The toggle is on E by default in most versions.

Shift colors without repainting

  • Change a layer’s color. Use Filter > Colors > HSV Adjustment, which shifts hue, saturation and value. Apply it as a filter layer if you want to adjust it later.
  • Adjust shadows and highlights. Filter > Colors > Color Balance pushes shadows and highlights toward a hue. Use a filter layer for edits you may revisit.
  • Darken an area. Add a Multiply layer and paint a darker tone on it, rather than painting darker colors over the flat.

Add canvas texture

There are three approaches, from simplest to most controlled.

Overlay a texture image

Place a paper or canvas texture image as the top layer, set it to Multiply or Overlay, and lower its opacity. Keep it on a separate layer so you can hide or change it without touching the painting.

Use a textured brush

Many brush presets use a texture. In the Brush Editor, the Texture option applies a pattern to each dab as you paint, so the grain follows your stroke. The option name can vary a little by version. To build your own, see how to make custom brushes in Krita.

Fill with a pattern

Import a pattern through the Resource Manager, then choose it as the fill source in the Fill tool. Some versions also let you fill a layer with a pattern directly. Patterns suit tiled surfaces such as stone or fabric.

Keep texture on its own layer so you can soften or remove it later. Adding texture to every layer is much harder to undo.

Checklist

  • Shading sits on layers inside a group, with Inherit Alpha on.
  • Shadow colors are tinted rather than pure black, and each blend mode matches the effect you want.
  • Texture sits on its own layer at a low opacity, and you can turn it off.
  • Color changes live on filter layers where possible, so you can revisit them.

For mapping your shading to a color palette, see how to add gradient maps to Krita. For the full painting workflow, see the Krita guide for digital painting.

The complete guide to krita

Krita for Digital Painting and Illustration: A Complete Guide
Read the guide

Keep exploring

Guides from other topics

All topics →