Fire and smoke are shapes of light and air rather than solid objects, so the painting approach is different from painting a rock or a cup. Fire is mostly about a color ramp, motion, and glow. Smoke is mostly about value, soft edges, and layering. This guide covers both, with a step-by-step sequence for fire and a set of steps for smoke.
Fire: shape, color, and motion
Shape and anatomy
Flames usually have a clear structure, even when they look chaotic:
- A base where the flame starts, often the brightest and most solid area.
- A body of brighter and warmer color, moving upward or outward.
- Tips that break up into smaller, flickering shapes and fade into the air.
Start with a simple block-in shape of the whole flame. Keep it bold, then break it up into tongues and tips. Blocking the big shape first stops the flame from looking like scattered marks.
A color ramp for fire
A color ramp is a set of colors from the hottest, brightest area to the coolest, dimmest edge. A common stylized ramp goes:
- Core: A pale, near-white yellow in the brightest area.
- Body: Yellow and orange, the main color of the flame.
- Outer body: Orange and red as the flame cools toward its edge.
- Edge: Dark red or deep orange, sometimes with a darker tone where the flame meets the air.
Many artists add a cool or blue accent at the base for a stylized effect, which can make the warm colors feel brighter. Real flames vary, so check reference photos for the look you want.
Motion and wind
Flames move upward, and they lean and bend with wind. Use these ideas to shape the flame:
- Lean the flame in the direction of the wind or the draft.
- Make the tips wavy and irregular. Smooth tips look artificial.
- Stretch the flame in the direction of its motion to suggest speed.
- Vary the size of tongues. A row of identical tongues looks mechanical.
Painting fire step by step
- Block in the shape. Use a hard round brush or the fill tool to place the full flame silhouette on its own layer.
- Add the body color. Paint the orange and yellow body along the shape, following the flow of the flame. Keep the edges soft enough to blend into the outer color.
- Paint the core. Add the brightest area near the base. Keep it smaller than the body.
- Refine the tips. Use a smaller brush or the smudge tool to break up the tips. Pull them in the direction of motion.
- Add red at the edges. Paint darker reds along the outside of the flame to separate it from the air.
- Add a glow layer. This is covered in the next section.
- Add embers. On a separate layer, paint small dots and streaks with a hard brush. Soften them lightly with a blur if they look too sharp.
Glow and light
A flame lights its surroundings. Add the glow on a separate layer above the flame:
- Use a soft brush in a warm color, painted around the flame’s outline.
- Set the layer to a light blend mode, such as Screen, Add, or Color Dodge. Lower the layer’s opacity until the glow feels right, because light blend modes can quickly push areas to white.
- Light the nearby surfaces. Add warm color to surfaces close to the fire, such as hands, walls, or clothing. Keep the light weaker the farther it is from the flame.
Blur filters can make glow more convincing. A Gaussian blur gives a soft halo, motion blur suggests movement, and radial blur can create a burst. Use them on a duplicate layer, so you can adjust the result without losing the original. The synthwave art tutorial uses the same blurred-duplicate method for neon glow.
The lighting setups guide explains how to treat fire as a light source in a larger scene.
Smoke: value, softness, and layers
Smoke is mostly about value and softness. Its shape matters less than how light and dark move through it.
- Smoke takes on the light around it. It can look lighter against a dark background and darker against a bright sky. Check the background value before choosing the smoke’s tone.
- Edges are soft or lost. Most smoke has soft edges, with a few crisp wisps where the density changes.
- Layers build density. Smoke looks more convincing when it is built from several transparent layers than from one solid shape.
- Wisps follow the flow. Smoke curls and drifts in a direction. Paint the wisps along that path.
Painting smoke step by step
- Block the main mass. Paint the basic shape of the smoke with a soft, low-opacity brush on a new layer.
- Build the tones. Add lighter and darker areas inside the mass, depending on where the light comes from.
- Add wisps. Paint thin, curving shapes with a small soft brush, following the flow.
- Soften. Blend the edges that are too hard. A soft eraser at low opacity is useful for fading.
- Add layers. Repeat with a second and third layer at different opacities, so the smoke has depth.
The hard vs soft edges guide covers the edge choices that make smoke look natural.
Common mistakes
- Too many colors in fire. A rainbow of colors looks unlike fire. Stick to a short ramp.
- Glows that are too bright. Light blend modes can wash out the image. Lower the opacity and check the result in grayscale.
- Smooth, evenly spaced tongues. Vary size and direction so the flame looks alive.
- Smoke with hard outlines. Hard edges make smoke look like paper cutouts.
- Muddy smoke. Too many layers at high opacity can turn smoke gray. Keep the layers light.
For more on fixing these problems, see the common mistakes guide.